Marshall Electronics Network Control Box for IMD Monitors NCB-1004 Instrucciones de operaciones descargar pdf (Pagina 10)

Changing the IP Address of the NCB-1004

Overview

The NCB-1004 is shipped with a default IP address of 192.168.0.233. This IP address can be changed via the network

connection. Note that the existing IP address must be known to make this change. If the existing IP address is

unknown, please contact Marshall Electronics for assistance.

Required Software

The following procedure requires Tera Term software for Windows, or a similar SSH tool. Tera Term is free software

available on the internet at the following location:

http://www.ayera.com/teraterm/

Procedure

1. Connect the NCB-1004 to your network or directly to your Windows-based PC, with a standard ethernet patch

cable. (When connecting the NCB-1004 directly to a computer, do not use a crossover cable.)

2. Verify connection of the NCB-1004 by loading the web interface in a browser window, at the current IP address.

3. Run the Tera Term software, and connect to the NCB via SSH at its existing IP address. Use the setting shown in

the picture below:

4. At the username prompt shown below, login as root:

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 23 24

Sin comentarios

Marshall Electronics Network Control Box for IMD Monitors NCB-1004 Instrucciones de operaciones Pagina 10